Plain Milled Parts

Plain Milled Parts

Plain milled parts are machined plates, blocks, grooved components and brackets used in general mechanical assemblies. Typical applications include construction machinery, tooling fixtures and support structures on automated production lines.
Send Inquiry
Description
Technical Parameters

Plain Milled Parts

Core Advantages

 

Defined Seating Surfaces

Milled faces with a surface finish of Ra 3.2 μm provide defined contact surfaces for bolted supports and fixture blocks. Where a component sits against a mating plate, machining removes the irregular stock surface rather than leaving the assembly to bear on it.

 

Fastening Without Rear Access

Tapped holes place the fastening thread within the component itself. On mounting blocks whose rear face is inaccessible after installation, screws enter from the accessible side without a separate nut behind the assembly.

 

Custom Plain Milled Parts

Huaquan machines parts from approved drawings or reference samples. Milling establishes the body, followed by drilling and tapping; the production drawing defines the finished geometry and identifies surfaces that must remain unmachined.

24

 

Customizable Items

 

Material: carbon steel, cast iron or aluminum

Overall length, width and thickness

External profile and stepped features

Hole diameters and positions

Thread sizes and locations

Groove width and depth

Edge chamfers

 

Quality Control

 

  • Incoming stock is checked for material identity, dimensions, hardness and visible defects. The first piece is inspected against the current drawing before the remaining parts enter production.
  • In-process checks focus on the relationship between mounting faces and hole patterns. Final dimensional and visual inspection checks for drawing compliance, burrs and handling damage; every finished part is inspected before packing.

 

FAQ

 

Q: What is the minimum order quantity?

A: The standard MOQ is 10 pieces; smaller quantities are negotiable.

Q: How long does a custom sample take?

A: Custom sample development takes 10 days.

Q: Can an internal milled corner be perfectly square?

A: Not with a standard rotating milling cutter; the internal corner retains a tool radius.

Q: Is blind-hole depth the same as usable thread depth?

A: No. Specify the drilled depth and the required full-thread depth separately.

Hot Tags: plain milled parts, China plain milled parts manufacturers, suppliers, factory, custom swiss screw machining, Connection Components, Low Precision Sleeves, machining precision parts, Plain Milled Parts, precision machining parts shops

Send Message