Precision Turn-Mill Parts
Core Advantages
Aligned axial and off-axis features
Combined turning and milling reduce transfers between separate machines. When a cross-hole or locating flat must align with a turned axis, retaining a common setup reduces the positional error introduced by reclamping.
Fewer interfaces in one-piece components
A shaft, flange, and milled drive feature can be formed in a single body. In a reversing drive or indexed mechanism, this removes the separate collar-to-shaft interface and its associated opportunity for joint movement.
Protection suited to the base metal
Aluminum anodizing and stainless-steel passivation provide substrate-specific finishing routes. On exposed housings and fittings subject to handling and moisture, anodizing forms a protective oxide layer on aluminum while passivation removes free-iron contamination from stainless steel.

Custom Precision Turn-Mill Parts
We work from released 2D drawings and 3D models, with material condition and order quantity used to plan stock preparation and production workholding. Tool access and machining order are reviewed before programming; changes to the component design require approval before manufacture.
Customizable Items
•Outside and inside diameters
•Overall length and stepped sections
•Flange outline and thickness
•Locating flats
•Radial and axial hole patterns
•Thread designation and engagement length
•Keyways and milled pockets
•Retaining-ring grooves

Quality Control
- First-piece inspection uses the drawing's datum system to relate milled and drilled features to the turned geometry. CMM checks cover accessible off-axis positions and angular relationships relative to the specified reference axis.
- In-process sampling follows the features most affected by tool wear, including bores and threaded sections. Machining adjustments are checked against the same inspection requirements before production continues.
- Every component is inspected before packing, with attention to chips and burrs inside intersecting features. Final records retain the part number, revision, and measured characteristics, and third-party inspection is accepted.
FAQ
Q: What are the payment terms for custom orders?
A: Custom orders require a 50% deposit and a 50% balance.
Q: Are free samples available?
A: Yes. Free samples are available; freight is excluded.
Q: Will a conventionally drilled blind hole have a flat bottom?
A: No. Specify a flat bottom separately.
Q: What corner geometry should be specified for a milled pocket?
A: Specify an internal radius or corner relief.

