Custom CNC Turning Parts
Core Advantages
Round Bodies with Working Side Features
Turning is combined with milling, drilling and tapping. In a cylindrical fitting that needs a side port or drive flat, these operations add the non-rotational interface to the same part, with access and drive features located directly on the turned body.
Aligned Mating Diameters
Finish machining controls coaxiality and circular runout to ≤0.01 mm. For a stepped adapter with two separated engagement diameters, the controlled relationship limits offset between the connected features and ties both engagement surfaces to the same rotational reference.
Close Control of Assembly Dimensions
Dimensional tolerances reach ±0.005 mm on specified features. At a locating shoulder or mating diameter, this control limits variation in assembled position while general clearances elsewhere remain governed by their own drawing requirements.

Specifications and Parameters
|
Parameter Item |
Technical Index |
|
Processing Diameter Range |
φ1mm - φ200mm |
|
Processing Length Range |
1mm - 500mm |
|
Dimensional Tolerance |
±0.005mm - ±0.05mm (according to customer requirements) |
|
Surface Roughness |
Ra 0.4μm - Ra 3.2μm (subsequent treatments such as polishing and electroplating are available) |
|
Coaxiality / Circular Runout |
≤0.01mm (finish machining) |
|
Processable Materials |
Aluminum alloy (6061/7075), stainless steel (303/304/316), carbon steel (45#/Q235), brass (H62/H59), copper, POM, PEEK, nylon, etc. |
|
Surface Treatment |
Anodizing, electroplating, blackening, plastic spraying, passivation, polishing, etc. |
|
Processing Technology |
CNC turning, drilling, tapping, milling, knurling, slotting, etc. |
Application Fields
Our custom CNC turning parts are widely used in multiple core industrial fields. In the textile machinery industry, we can produce key components of equipment such as carding machines and spinning frames, including main shafts, sleeves, gear shafts, etc. In the general electromechanical equipment field, we provide precision transmission and connection parts for small and medium-sized motors and automated conveying equipment. In the hydraulics and pneumatics industry, we can process various fluid control components such as valve bodies, valve cores, joints and piston rods. In the automotive parts industry, we produce engine accessories, gearbox parts, sensor housings, etc. In the electronic and electrical industry, we manufacture precision structural parts such as connectors, terminals, heat sinks and housings. In the medical device industry, we provide surgical instrument accessories and medical equipment components.
Customization
Drawing-Based CNC Turning
We produce from the released drawing, 3D geometry or an agreed reference part documented for manufacture. The machining route carries the drawing references through each setup and defines the finishing stage before production, so the accepted geometry is not left to separate workshop interpretations.
Customizable Items
• Outside diameter: 1–200 mm
• Overall length: 1–500 mm
• Internal cavities and stepped bores
• Thread form and engagement length
• Retaining-ring grooves and end details
• Knurl pattern and grip length
• Metal or engineering-plastic grade
• Anodized, plated, black-oxide, powder-coated or polished finish
Quality Control
- Material checks and process documents are matched to the released part revision. First-piece inspection confirms the relationship between the turned reference surfaces and the features added in secondary setups before the same process is repeated across the run.
- In-process sampling follows the features affected by tool wear or repositioning. Coordinate or optical checks address feature location, while bores and openings are examined for chips and burrs left where machining paths intersect.
- Final inspection covers every part before packing. Dimensions, visible finish defects and part identity are checked separately, and the accepted quantity is matched to the order; third-party inspection is available before shipment.
FAQ
Q: How long does a custom sample take?
A: Custom sample development takes 10 days.
Q: What is the production lead time for custom parts?
A: Custom production takes 10–15 days.
Q: Does a hole shown in a 3D model define its thread?
A: No. Specify thread size, pitch, fit class and full-thread length on the drawing.
Q: Should an anodized bore be dimensioned before or after coating?
A: State the final size after anodizing and identify areas to remain uncoated.

