High Precision Turned Parts
Core Advantages
Close Control of Locating Fits
Dimensional tolerances reach ±0.005 mm on specified features. For a locating pin that is removed and refitted during equipment changeover, controlling the working diameter limits clearance variation between replacement pins and keeps replacement parts within the same specified locating fit.
Controlled Radial Movement
Coaxiality and circular runout are controlled to ≤0.01 mm. On a rotating instrument sleeve, the working surface remains referenced to the mounting axis, limiting radial variation across a revolution.
Smooth Assembly Contact
Surface roughness reaches Ra 0.4 µm. At an insertion or sliding interface, the refined finish reduces pronounced machining peaks that would otherwise concentrate contact, giving the working interface a defined texture during insertion and repeated movement.

Specifications and Parameters
|
Parameter Item |
Technical Index |
|
Maximum Processing Diameter |
φ200mm |
|
Maximum Processing Length |
500mm |
|
Highest Dimensional Accuracy |
±0.005mm |
|
Optimal Surface Roughness |
Ra 0.4μm |
|
Geometric Tolerance |
Coaxiality ≤0.01mm, Circular Runout ≤0.01mm |
|
Processable Materials |
Aluminum alloy 6061/7075, stainless steel 303/304/316, carbon steel 45#/Q235, brass H62/H59, titanium alloy, POM, PEEK, nylon, etc. |
|
Optional Surface Treatment |
Anodizing (natural/color), electroplating nickel/chromium/zinc, blackening, plastic spraying, passivation, polishing, wire drawing, etc. |
|
Supporting Processing Technology |
CNC turning, precision drilling, tapping, milling, knurling, slotting, chamfering, etc. |
Customization
Custom High Precision Turned Parts
Manufacture follows the released component drawing, with functional references carried from turning into secondary machining. The process route separates the dimensions that establish assembly position from general body geometry, and production documents preserve those distinctions through the job.
Customizable Items
• Outside diameter: up to 200 mm
• Overall length: up to 500 mm
• Stepped profile and shoulder locations
• Bore geometry and counterbore depth
• Thread type, size and pitch
• Cross-holes, slots and milled flats
• Material grade and protective finish
Quality Control
- Incoming stock is checked against the specified material and condition. First-piece inspection establishes that the machining setup produces the drawing features before the production run continues, with the accepted references retained for subsequent checks.
- Micrometers and coordinate measurement are used according to the feature being inspected. In-process sampling addresses dimensional drift and setup changes, while visible marks, burrs and edge damage are checked independently of the numerical measurements.
- Every completed part is inspected before packing. Records link the measured result, drawing revision and production lot, and dimensional reports identify the checked feature, its requirement and the recorded value instead of supplying an unreferenced pass statement.
FAQ
Q: Are free samples available?
A: Free samples are available; freight is not included.
Q: What are the payment terms for custom parts?
A: Custom orders use a 50% advance payment and a 50% balance payment.
Q: What operating conditions should be included in a fit specification?
A: State the mating materials and operating temperatures.
Q: What information is needed to report an out-of-tolerance part?
A: Send the order reference, affected quantity, feature location and measured result.

