CNC Precision Components
Core Advantages
Controlled Fits in Compact Assemblies
Dimensional tolerances reach ±0.003 mm on specified features. In an instrument insert that seats inside a compact housing, the controlled mating dimensions limit clearance variation and preserve the specified engagement with the surrounding housing.
Defined Support Planes
Flatness is controlled to ≤0.003 mm. A small mounting face that bears against a rigid reference surface seats on a defined plane, limiting local gaps caused by uneven face geometry when the component is clamped into the assembly.
Reduced Mass in Moving Assemblies
Aluminum 6061 and 7075 are available for compact housings and mounting elements. In a moving positioning assembly, an aluminum body weighs less than a steel body of the same volume, reducing the mass accelerated and stopped with each movement.

Specifications and Parameters
|
Parameter Item |
Technical Index |
|
Processing Diameter Range |
φ0.5mm - φ100mm |
|
Processing Length Range |
0.5mm - 300mm |
|
Highest Dimensional Accuracy |
±0.003mm |
|
Optimal Surface Roughness |
Ra 0.2μm |
|
Geometric Tolerance |
Coaxiality ≤0.005mm, Circular Runout ≤0.005mm, Flatness ≤0.003mm |
|
Processable Materials |
Aluminum alloy 6061/7075, stainless steel 303/304/316L, brass H62/H59, titanium alloy TC4, POM, PEEK, PC, nylon, etc. |
|
Surface Treatment |
Anodizing, gold plating, silver plating, electroless nickel plating, passivation, polishing, wire drawing, laser marking, etc. |
|
Processing Technology |
Precision CNC turning, milling, drilling, tapping, reaming, grinding, EDM, etc. |
Customization
Custom CNC Precision Components
We work from the released component drawing and 3D geometry, using the specified datums to connect the turning and secondary machining stages. Machining programs and process documents follow the same revision, keeping the component's locating scheme consistent through production.
Customizable Items
• Outside diameter: 0.5–100 mm
• Overall length: 0.5–300 mm
• Body profile and recessed features
• Bore geometry and counterbore depth
• Radial-hole position and orientation
• Thread specifications and milled flats
• Metal or engineering-plastic grade
• Surface treatment and laser identification
Quality Control
- Inspection begins with the material identity and drawing revision assigned to the job. The first-piece check establishes the reference features used for subsequent measurements, preventing dimensions from being accepted against different, incompatible locating arrangements.
- Coordinate measurement checks spatial relationships; optical measurement addresses small profiles and accessible edges. Process sampling follows dimensional drift during the run, while surface checks distinguish a geometric error from a scratch, burr or finishing defect.
- All finished components are inspected before packing. Part numbers, lot references and measured results are retained together, and the dimensional-report scope is defined against the features identified on the drawing.
FAQ
Q: What is the minimum order quantity?
A: The minimum order quantity is 10 pieces.
Q: Are free samples available?
A: Free samples are available; freight is not included.
Q: Can EDM machine unfilled POM or PEEK components?
A: No. Unfilled POM and PEEK are not suitable for EDM.
Q: What material details are needed for a PEEK component?
A: State the compound grade, filler type and filler content.

