CNC Od Grinder
Core Advantages
Controlled external fit
Standard OD grinding holds a dimensional tolerance of ±0.02 mm. For locating journals assembled with a matching bore tolerance, this limits variation in the resulting clearance between repeated components.
More uniform rotating contact
Cylindrical grinding corrects roundness and cylindricity errors on the working diameter. Where a rotating journal contacts a surrounding sleeve, reducing these form errors limits uneven circumferential contact caused by an out-of-round profile.
Fine texture on sliding diameters
Surface finishes range from Ra 0.2 to Ra 0.8 μm. On ground diameters that slide through bushings or guides, the finer texture reduces prominent surface peaks along the contact path.

CNC Od Grinder Customization
Production follows the component drawing and the specified stock condition. We select the grinding wheel and machining sequence around the workpiece material, including alloy steels, bearing steels, carbide, and ceramics, then establish the workholding needed for the external profile.
Customizable Items
Workpiece material and condition
Overall length
Journal diameters and lengths
Step positions
Taper angle and length
Shoulder geometry
Relief grooves
End-face features
Quality Control
- Incoming blanks are checked for material identity, hardness, and visible defects before grinding. The inspection plan lists dimensional and geometric requirements separately, with the measurement datum defined for each relevant feature.
- First-piece and in-process measurements cover several axial positions on the workpiece. Runout is checked against the specified rotational datum, and periodic measurements track changes associated with wheel wear.
- Finished surfaces are examined for grinding marks, scratches, and edge damage before 100% pre-packing inspection is completed. The measured results remain associated with the drawing revision and production lot.
FAQ
Q: How long does a custom sample take?
A: Custom sample development takes 10 days.
Q: Can packaging protect each ground journal separately?
A: Yes. Individual protection and export packaging are arranged to your packing requirements.
Q: How should internal bore finishing be specified?
A: Specify it as a separate internal machining or grinding operation.
Q: What else should be specified for a rotary-seal journal?
A: Specify the seal supplier's surface-lead, hardness, and counterface requirements.

